Useful Information for Civil Engineers



 

Hello Friends, In this video lecture I will discuss about some useful information for civil engineers, which is too much important to learn. so Let’s get start.

Some Useful Information for Civil Engineers:

1: Lapping length of tension member is 40D            where D is dia of steel which are using in tension member.

2: Lapping length of compression member is 50D     where D is dia of steel which are using in compression member.

3: Concrete should be not fall more than 1.5 meter

4: Weight of one meter steel formula is D2 / 162    so it will give us the   weight in kg/m    but D should be in mm

5: Density of cement is 1440kg/ cu.m

6: Volume of One bag cement is 0.0347 cu.m         which is 50kg

 



7: Volume of one bag cement is 1.25 cft                  which is 50kg

8: Maximum water absorption by bricks – 15%

9: Compressive strength of bricks is  3.5 N/mm2

10: Density Of Bricks is from 1600 to1920 Kg/m3

 

Also Read :How to Check Good Quality Of Cement at Site

2: How to calculate Volume of Cement Bag

 

For more Detail watch the given video of my channel :

 

Written by: Engr Sami Ullah Stanikzai

Engr Sami Ullah Author

Founder & Admin of civilengineeringinfo.com I am Civil Engineer working as a Site Engineer. With a good subject knowledge in civil Engineering. And I have started the blog to share my valuable information with civil engineer students. Civil Global is the Civil Engineering learning Home around all over the world.

Comments

    Adnan intezar

    (March 20, 2018 - 11:21 am)

    Thank you for giving good information about aur feild……you are giving a lot of knowledge about civil engineering and this is your goodness that you share it to all of us. thanks again

    Siva

    (March 20, 2018 - 3:04 pm)

    Footings and columns and slab and beams how to design which soft ware is best

Leave a Reply

Your email address will not be published. Required fields are marked *